Wireline Products

Integra Well Solutions promote extension of the well through Wireline operations, not workover. Promoting wireline operations using existing fishing tools and wide-ranging knowledge Integra Well Solutions can assist in removing wellbore obstacles with maximum proficiency and eliminate the need for costly workovers

• 

  Wireline Tools

• 

  Heavy Duty

• 

  Lined Pipe Tools

• 

  Eline and Slickline

X, R, RXN

The X, R and RXN Running Tools are designed to set X and XN, R and RN lock mandrels.

More Info

Retrofit Style

The Retrofit Running Tool is designed to set retrofit lock mandrels.



More Info

Integra Running Tool

The Retrofit Running Tool is designed to set retrofit lock mandrels.

More Info

Integra Pulling Tool

The Integra Pulling Tool is designed to pull the new range of Integra lock mandrels.



More Info

GS

The GS Pulling Tool is designed to deploy and retrieve sub-surface devices with internal fishing necks

More Info

External Pulling Tools

External Pulling Tool is designed to engage external fishing necks on subsurface devices within the well-bore. The S Pulling Tool is available with three different core lengths, sized to accommodate the different reach lengths on industry standard fishing necks.

More Info

Selective Test Tool

The Selective Test Tool is used to pressure test the tubing above the nipple in which it is set. The tool allows the operator the flexibility to locate, land, and pressure test the tubing in any desired Landing Nipple within the tubing string.

More Info

Standing Valve

The Standing Valve is placed in the tubing string when there is a need to retain fluid from being drawn back into the wellbore formation. Suitable for multiple scenarios including submersible pump operations.

More Info

Rope Socket

The Integra Heavy-Duty range cover 2-1/2” and 2-11/16” toolstrings compared to our standard offering found in our 1-1/4” to 2-1/8” range.
The Integra Rope Socket is the uppermost component in a wireline tool string and forms an essential link between the tool string and the wire.

More Info

Stem

The Wireline Stem (also known as Sinker Bar) serves a dual purpose. It provides the necessary weight to overcome the effects of friction, fluid viscosity and pressure. It also provides the kinetic energy during jarring operations. Can be supplied with either Tungsten or Lead filled as well.

More Info

Accelerator

The Integra Accelerator Sub is designed to enhance upward jarring impact when used in conjunction with the Integra Adjustable Spring or Integra Hydraulic Jar.

More Info

Jar

The Spring Jar is a telescoping upstroke jar run in conjunction with wireline stem above. The Spring Jar can be adjusted at surface to a predetermine release force offering the operator a controlled impact force at the tool during heavy duty wireline operations.
More Info

Roller Stem

The Integra Multi-Roller Sub is designed for use in lined pipe wells, and offers a 360 degree wheel contact, reducing the friction caused by contact with the tubing membrane.

More Info

Setting Tool

The Integra Setting Tool is a unique electro-mechanical downhole setting tool, capable of delivering up to 90,000 lbs of linear force which can be used to set, or un-set the range of lined pipe tools available from Integra without compromising the integrity of the pipe liner.

More Info

Pulling Tool

The Pulling Tool is designed to deploy and retrieve the range of Integra Lined pipe devices with internal fishing necks without compromising the liner membrane.

More Info

Rope Socket Swivel

The E-Line Rope Socket Swivel combines E-Line technology with two existing wireline tools combining in one simple to assembly device for deploying your E-line devices.

More Info